Page 195 - 2024 Action Handling

FORK TRUCK ATTACHMENTS

WHEELIE DRUM
HANDLER
ATTACHMENT
The unique attachment allows wheelie bins to be picked up and
emptied into a skip or container. The bin is picked up via the rear Our expert says
handles and a pull cord attached to the wheel. The other end is fed
through a winch, which is located onto the truck cab. When the THE
mast is raised and/or the winch is opened the rear end of the FACTORY
wheelie bin is pivoted upwards to allow the lid to open and the FRIEND
contents discharged. The winch/pulley mechanism can be mounted
to the left or right depending on the offset of the fork truck seat.
Supplied complete with locating stand. Only suitable for small
wheelie bins and use with light waste.

WHEELIE BIN AND DRUM
ROTATOR ATTACHMENT
Designed for use in areas where drums and wheelie
bins are used, this drum rotator has a special girdle
that allows both to be clamped around their mid
points and rotated. Can be rotated by either means
of a crank handle or loop chain. Handles 210 litre
drums and 120/240 litre wheelie bins. Bin/drum is
located in the girdle by a ratchet and webbing strap.
Capacity is 360kg.
Max Method
REF fork of Drum PRICE
type
size operation
Crank Wheelie
DTR-1-MP 140 x 50 handle bin £1927.70 REF Capacity kg Max fork size Fork spread Wheelie bin type Weight kg PRICE
FM-WBH-L 200 145 x 60 507mm 90-240 litre 65 £1119.25
DTR-2-MP 140 x 50 Loop Wheelie £2083.10
chain bin FM-WBH-R 200 145 x 60 507mm 90-240 litre 65 £1119.25
CARPET POLE ATTACHMENT
Carpet Poles are designed for efficient and safe
handling of long coiled or round loads of fabric, carpet
or other types of coverings. The ICP range are carriage
mounted and IFB range are fork mounted for a quick
change solution.

Standard features:
• High tensile pole with a tapered end for easy location.
• Smooth finish to protect carpets.
• Polyester powder coated bright orange/matt black
for safety.
Carriage mounted Boom Cap kg Lost load Centre of
REF IFA/FEM dia Length @ centre gravity PRICE
mm
Class
mm 1829mm mm mm
ICP-1 2 70 3000 500 85 690 £1889.60
ICP-2 2 75 3000 600 85 650 £2052.80
ICP-3 3 75 3000 600 90 595 £2299.20
Boom dia Length Cap kg @ Max fork Fork
REF PRICE
mm mm 1829mm size mm spread mm
IFB-1 70 3000 500 125 x 50 445 £1777.60
IFB-2 75 3000 600 125 x 50 445 £1921.60
IFB-3 75 3500 600 125 x 50 445 £2340.80

FORK FENDER ATTACHMENT • Helps prevent pedestrian accidents.
• Highlights the danger of fork tines.
This low cost safety device is a must for • Safeguards against trip hazards.
any working area where fork trucks are • Size: 1000mm L x 100mm W x 85mm H.
present. Moving or stationary trucks with Slot size is 300mm x 15mm with a 790mm
bare forks present a serious hazard to fork spread.
pedestrians. Have piece of mind knowing
you have safeguarded this danger.
REF PRICE
FBF-C £77.70

Prices include delivery on orders over £150 193